A Tesira SERVER or SERVER IO has two RS-232 ports. A TesiraFORTÉ, IDH-1 and OH-1 have one RS-232 port. Each Port can be configured to:
Troubleshooting TTP gives information on configuring a PC to connect to a Tesira system for testing purposes.
The baud rate can be adjusted in Device Maintenance using the Serial Port Settings dialog. Baud rate of the RS-232 port can be set to 300,1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200.
| Device | Port Name | Default Setting |
|---|---|---|
| SERVER and SERVER IO | Serial 1 | 9600, Command String |
| SERVER and SERVER IO | Serial 2 | 115200, TTP |
| TesiraFORTÉ | RS-232 | 115200, Both |
| IDH-1 | RS-232 | 115200, Both |
| OH-1 | RS-232 | 115200, Both |
If multiple servers are connected together in a system then only one RS-232 port needs to be connected to a third-party control system; TTP commands are proxied via the Ethernet port to other devices in the system. In an unsecured Tesira system RS-232 connections do not require authentication.
If a system has security enabled the RS-232 will not require authentication until the connection is fully terminated using a 'exit' command. There will then be a requirement to authenticate at the next log on. Once logged in to a secured server via RS-232, this user has access until a 'exit' command is sent, even if the serial connection is removed and restored. Please review the TTP security setting for more details.
When controlling multiple Tesira units that are not part of the same TMF file, each Tesira server unit will need to be addressed via its own RS-232 port. Tesira units cannot be linked together via RS-232.
A straight through PC Serial Cable is used to communicate from an RS-232 port on a third-party controller (or PC*) to the RS-232 port located on the back of an Tesira Server.
Serial Connection
Pin #1: not used
Pin #2: Transmit data (TxD) Output
Pin #3: Receive data (RxD) Output
Pin #4: not used
Pin #5: not used
Pin #6: not used
Pin #7: not used
Pin #8: not used
Pin #9: not used
(* A PC can send/receive TTP Strings using a terminal emulator program such as HyperTerminal or PuTTY.)